Print Page | Close Window

,44 amp once fired brass, original grips, ammo box

Printed From: AMT Guns information
Category: Auto Mag Pistol
Forum Name: Gun Classifieds
Forum Description: Gun Classifieds
URL: http://www.amtguns.info/forum_posts.asp?TID=1080
Printed Date: 27 Mar 2026 at 1:23am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: ,44 amp once fired brass, original grips, ammo box
Posted By: Pontiaker
Subject: ,44 amp once fired brass, original grips, ammo box
Date Posted: 24 May 2012 at 5:25am
SOLD pending funds!  350 rounds of once fired brass. 90% of it is Starline brass and the last 10% a mix of CDM and Norma brass. Also another 100 rounds of loaded ammo, brass on this stuff was made from 308 or 30/06 rifle casings and is loaded with 240 grain jacketed hollowpoints with 23 grains of H110. I did not load this brass, I got it with one of my guns way back when. I dont shoot anyone elses reloads and I dont recommend shooting other peoples reloads so I am selling this for the brass only. I highly recommend pulling the bullets and use the primed brass and bullets with your own powder charge. If you bought new Starline brass from Midway 450 cases would cost you about $315 plus shipping. So your getting 450 rds of brass and 100 jacketed hollowpoint bullets. All together Iam asking $205(SOLD pending funds!) for it shipped in the US.

I might break the brass up but would really like to sell it all together. If it does not sell in a week or so I will break it up if you would like me to.

SOLD pending fundsI have two original factory clear plastic ammo boxes that hold 50 rds each. One has the raised logo and one has the raised logo in black. $60(SPF) for both of them shipped.

I have four pair of factory black plastic grips. One set is the harder factory plastic, one set is the softer style factory made plastic with the casting bubbles showing on the back. Also have a second pair of the harder plastic but they are cracked at the bottom of one grip around and under the lower screw hole.Then I have a pair of recently made white plastic grip panels. These are the cheap ones that fit ok but not great. They work fine for a shooter.

SOLD$50 for factory black hard plastic SOLD
$50 for the factory blast hard rubber cast syle black grips shipped conus.
$30 for the factory black grips that have the cracks shipped conus.
(SPF)$25 for the aftermarket white plastic grips shipped conus. SOLD pending funds

The grips above are all the later style grips with the large patch of checkering NOT the full checkered earlier grips.

If you want to buy everything listed above let me know and I will give you a great package price. Let me know if you have any questions.
Thanks!
Matt





Replies:
Posted By: guppypuppy2
Date Posted: 25 May 2012 at 4:17am
hi there. sent you an email. Im interested. thanks ron


Posted By: Pontiaker
Date Posted: 25 May 2012 at 5:54am
Ron I replied to your email, thanks!
Matt


Posted By: jw4570
Date Posted: 29 May 2012 at 12:56am
Matt,
 
I'll take the white grips if you haven't sold them.
 
Jason


Posted By: Pontiaker
Date Posted: 29 May 2012 at 5:02pm
Hi Jason, the white grips are yours. Give me your shipping addy and I will get them out. If you want to use Paypal the email payment addy is ata2nv@comcast.net
Thanks!
Matt


Posted By: jw4570
Date Posted: 30 May 2012 at 3:04am
Matt,
 
Payment sent!!!
 
 Thanks,
 
Jason


Posted By: TRX302
Date Posted: 02 Jun 2012 at 9:10pm
Black grips arrived today. Thanks!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net