Print Page | Close Window

AMT III Assembly Help

Printed From: AMT Guns information
Category: Auto Mag Pistol
Forum Name: FAQ
Forum Description: They always get asked so take a look first.
URL: http://www.amtguns.info/forum_posts.asp?TID=2543
Printed Date: 26 Oct 2020 at 10:37am
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com


Topic: AMT III Assembly Help
Posted By: SteveS
Subject: AMT III Assembly Help
Date Posted: 08 Sep 2019 at 5:59pm
So I recently got my AMT III back from cerekote after stippling the slide area behind the ejection port for the earlier case marking issues I had.  I've straitened out the ejector as members on here suggested (thank you) and have a new issue.  

The hammer was not engaging the sear when pulled back.  After inspection, I think some cerekote got built up on the sear return spring.  I removed the sear and spring but the way they dropped out made it hard to see their original orientation.  

Anyone have a close up pic of that area so I can verify?  





Replies:
Posted By: wbautomag
Date Posted: 08 Sep 2019 at 9:07pm
Goes like this




Posted By: Luvz2Shoot
Date Posted: 22 Nov 2019 at 10:19pm
Just ran across this on YouTube.  It was posted 3 months ago, so it's "fairly new".

https://www.youtube.com/watch?v=ZEiphsCnOf4&feature=emb_logo" rel="nofollow - https://www.youtube.com/watch?v=ZEiphsCnOf4&feature=emb_logo




-------------
If you were happy and you knew it, would you clap your hands?


Posted By: XP001
Date Posted: 23 Nov 2019 at 7:16am
This video shows nothing about the frame part he needed, sear and sear spring. Sent info to him for his issues, happy camper now.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.03 - http://www.webwizforums.com
Copyright ©2001-2019 Web Wiz Ltd. - https://www.webwiz.net